Pcipnp - Asus K8N-DL User Manual

Asus computer hardware - motherboard user manual
Table of Contents

Advertisement

4.4.5
4.4.5

PCIPnP

PCIPnP
4.4.5
4.4.5
4.4.5
PCIPnP
PCIPnP
PCIPnP
This menu shows the PCIPnP configuration settings. Select an item then
press <Enter> to display a pop-up menu with the configuration options.
Resources Controlled By
IRQ Resources
PCI/VGA Pallete Snoop
** PCI Express relative items **
Maximum Payload Size
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Allows automatic or manual assignments of IRQ resources to boot devices
and Plug and Play devices. Configuration options: [Auto] [Manual]
When the item R e s o u r c e s C o n t r o l l e d B y
IRQ Resources is grayed out and not user-configurable. Refer to the
section "IRQ Resources" for information on how to enable this item.
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video
cards, may not show colors properly. Setting this field to [Enabled]
corrects this problem. If you are using a standard VGA card, leave this field
to the default setting [Disabled]. Configuration options: [Disabled]
[Enabled]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Sets the maximum TLP payload size (in bytes) for PCI Express devices.
Configuration options: [128] [256] [512] [1024] [2048] [4096]
4 - 3 0
4 - 3 0
4 - 3 0
4 - 3 0
4 - 3 0
Memory Configuration
[Auto]
[Disabled]
[4096]
R e s o u r c e s C o n t r o l l e d B y
R e s o u r c e s C o n t r o l l e d B y
R e s o u r c e s C o n t r o l l e d B y is set to [Auto], the item
R e s o u r c e s C o n t r o l l e d B y
Select Menu
Item Specific Help
BIOS can automatically
configure all the boot
and Plug and Play
compatible devices. If
you choose Auto, you
cannot select IRQ DMA
and memory base address
fields, since BIOS
automatically assigns
them.
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p

Advertisement

Table of Contents
loading

Table of Contents