Recalling Settings - Meridian DSP5000C User Manual

Dsp centre-channel loudspeaker

Hide thumbs Also See for DSP5000C:

Table of Contents

tilt to 0.0

balance to middle

You cannot store settings in Normal mode. See page 39.

Recalling settings

The settings stored in the DSP5000C can be recalled at any time. When

the display is normal (i.e. not a tone cursor):

1. Press Store

The DSP5000C will respond with

rEc.

Tip You can now compare the stored settings with the standard ones.

Use the Clear key to restore a flat response, then Store to recall the

stored settings.

Note When you change sources, you will need to press Store to recall

any favourite tone setting you may have stored.

Note Clear does not reset the phase and axis settings.

Using DSP5000C

DSP5000C User Guide

Table of Contents