6.6
Installation of the flue gas adapter
(included in the scope of delivery)
Before installing the exhaust and air intake system, it is
necessary to remove the transport safety device and to
install the flue gas adapter.
NOTICE
The transport safety device has been installed
to prevent unwanted movement of the heat
exchanger during transport.
Remove the transport safety device with the two screws
(see fig. 13).
Screw on the flue gas adapter using six screws (see
fig. 14).
We reserve the right to make any changes due to technical modifications!
Installation instructions Logamax plus GB142-24/30/45/60 • version 10/2007
Fig. 13 Removing the transport safety device
Fig. 14 Connecting the flue gas adapter
Installation
6
Buderus • http://www.buderus.net
19