Meridian 565 Installation Manual page 35

To set up speaker protection for 5.1
sources
Because of the high bass levels that 5.1 channel sources are
capable of reproducing, the digital surround processor allows
you to set up automatic protection of each full-range speaker or
subwoofer in your system.
Press > or < until you see a display
such as:
Press A or V to specify the volume of bass that the speaker
can withstand, according to the table opposite.
A setting of Max corresponds to no protection, and 0
corresponds to full protection.
The following table gives suggested settings for different types
of speaker. Generally reflex or active speakers can take a higher
score. As a guideline, add 2 for a reflex design.
For Meridian DSP Loudspeakers set Size to Max.
Size of
drivers
6 inch
8 inch
10 inch
12 inch
1 S i z e M a x
15 inch
To specify the output precision
If you are using Meridian DSP Loudspeakers set the output
precision to 22 bits as follows:
1 bass
unit
0
4
8
14
20
Press > or < until you see a display
such as:
Press A or V to set the value to 22 bits.
2 bass 3 bass
units units
4 8
10 14
14 18
20 24
26 30
1 2 2 B i t s
31