Meridian 565 Installation Manual page 20

Digital surround processor
Hide thumbs Also See for 565:
Table of Contents

Advertisement

To connect to a 562 or 562V Digital
Control Unit
565 Digital Surround Processor
DIGITAL
IN
Connect the main digital output of the 562 or 562V to the 565
DIGITAL IN, using high-quality 75 screened cable.
Connect all the analogue and digital sources you want to use
to the appropriate inputs of the 562 or 562V.
Configure the 562 to Type 1.
Configure each 562 or 562V source as required; refer to the
562/562V User Guide for more information.
Configure the 565 to a 562 Type option; see 565 standard
settings, page 21.
16
562 Digital Control Unit
DIGITAL
OUT MAIN
Up to 8 analogue, 5 digital,
Digital lead
and 2 optical sources.
To connect to a 501 or 501V Control
Unit or other preamplifier
565 Digital Surround Processor
ANALOGUE
INPUT
DIGITAL
OPTICAL
IN
IN
Digital input
Optical input
eg CD player
eg LaserDisc
Connect the main analogue output of the preamplifier to the
565 ANALOGUE INPUT, using high-quality screened cable.
Connect analogue sources to the preamplifier.
In addition, connect any digital and optical source directly to
the 565.
For example, if your CD player provides both an analogue output
and digital output, you will get better performance by connecting
the digital output directly to the 565.
If you are using a 501/501V configure it to Type 1 and set the
volume control option to Fout (fixed output).
501 Control Unit
MAIN OUT
AUDIO INPUTS
Up to 6 analogue
inputs

Advertisement

Table of Contents
loading

Table of Contents