Meridian 565 Installation Manual page 46

Choose the position in which the subwoofer reinforces the
sound from the main speakers in the crossover region.
You should not adjust the delay as this has already been
specified when you time-aligned the layout.
Other subwoofers
Press Store to adjust any additional subwoofers in the system
in exactly the same way. In each case adjust the phase for
maximum reinforcement.
Use ] and [ to step between the subwoofers.
In the case of other configurations you will be balancing different
combinations, in some cases the best test is that multiple
subwoofers reinforce each other or the bass from wideband
speakers like the main left and right (if applicable).
The table opposite lists the combinations and adjustments you
may make for the different Layout options; see Specifying the
speaker layout, page 22.
42
Layout Sounds Adjusting Adjust phase for
A L and MS MS
B L and CS CS
C, K L and LS LS
R and RS RS
LS and RS RS
D L and MS MS
E L and CS CS
LS and CS CS
LS and RS RS
F L and LRS LRS
LRS and CS CS
H, J L and CS CS
CS and SS SS
Key: L=Main Left, R=Main Right, MS=Mono Sub, CS=Centre
Sub, LS=Left Sub, RS=Right Sub, LRS=Left+Right Sub,
SS=Surround Sub.
Crossover reinforce
Bass adding to L bass
Crossover reinforce
Crossover reinforce
Bass reinforcing check
Crossover reinforce
Bass adding to L bass
Bass adding to LS
Bass reinforcing check
Crossover reinforce
Bass adding to LRS
Bass adding to L bass
Bass adding to CS