Table of Contents
Advertisement
RDV-1050 DVD Player
Connecting to Audio
Equipment with a Digital Input
You can enhance the sound quality by con-
necting the OPTICAL DIGITAL OUTPUT
COAXIAL DIGITAL OUTPUT
RDV-1050 to the digital input of an amplifier,
DAT or MD by using an optional digital cable.
The digital stereo audio signal from a disc is
directly transferred. If you connect the unit to
a Dolby Digital or DTS decoder or an ampli-
fier with built-in decoder by using an optional
digital cable, you can enjoy high-quality sur-
round sound.
When you make the digital connection, also
make the analog connection, because, depend-
ing on the disc type, no audio may be repro-
duced from the DIGITAL OUTPUT.
With the digital connection, the Preference
menu settings for COMPRESSION and DOWN
MIX are disabled. Settings for these items must
be made from the decoder.
IMPORTANT NOTE ABOUT
DIGITAL SIGNAL CONNECTION:
The Digital Audio Output setting in the Au-
dio Preferences on screen display must be
properly set for the type of output being
used when using an optical or coaxial digi-
tal signal connection. If this preference set-
ting is not done correctly, loud noise may be
generated which can damage the speakers.
Before using the RDV-1050 with a digital
signal connection be sure the proper type of
Digital Audio Output has been selected. See
the Audio Menu information in the Prefer-
ences Setting section of this manual.
Connecting to an Audio
Amplifier or Receiver
You will get better sound quality if you con-
nect the audio outputs of the RDV-1050 to a
high quality amplifier or receiver and use com-
ponent loudspeakers, rather than those built
into the television.
You can connect the front left and right AU-
DIO OUTPUTS
of the RDV-1050 to any
high level input (such as AUX, DVD, CD, etc.)
of an amplifier or receiver.
The RDV-1050 also has rear channel left and
right outputs and outputs for a center chan-
nel and a subwoofer. If your receiver, ampli-
fier or surround processor has 5.1 channel in-
puts, you can connect these to the outputs of
the RDV-1050.
Optical Connection
or
AUDIO OUT
of the
White
White
White
CENTER
SUB
WOOFER
Red
Red
Red
REAR
Audio Cable
Coaxial Connection
AUDIO OUT
White
White
White
CENTER
SUB
WOOFER
Red
Red
Red
REAR
Audio Cable
Audio Connection
AUDIO OUT
CENTER
SUB
WOOFER
REAR
8
DIGITAL OUT
VIDEO OUT
VIDEO
COMPONENT
LEFT
COAXIAL
Y
PCM/STREAM
RIGHT
OPTICAL
FRONT
S-VIDEO
Optical Digital Cable
Digital equipment
Red
White
DIGITAL OUT
VIDEO OUT
VIDEO
COMPONENT
LEFT
COAXIAL
Y
PCM/STREAM
RIGHT
OPTICAL
FRONT
S-VIDEO
Coaxial Digital Cable
Digital equipment
Red
White
DIGITAL OUT
VIDEO OUT
VIDEO
COMPONENT
LEFT
COAXIAL
Y
PCM/STREAM
RIGHT
OPTICAL
FRONT
S-VIDEO
Red
White
Red
White
P
P
B
R
IN
IN
DIGITAL
RIGHT
AUDIO
OPTICAL
LEFT
P
P
B
R
IN
IN
DIGITAL
RIGHT
AUDIO
COAXIAL
LEFT
P
P
B
R
Amplifier or Receiver
IN
White
RIGHT
FRONT
LEFT
Red
RIGHT
REAR
LEFT
SUBWOOFER
CENTER
Advertisement
Table of Contents
