EverFocus ED335 Operation Instructions Manual page 9

1/3” ccd indoor 3-axis dual voltage true day/night ir dome camera

Hide thumbs Also See for ED335:

Table of Contents

3-AXIS GIMBAL BRACKET

The 3-axis gimbal enables installers to easily mount the camera on a wall or ceiling and then using the built

in tilt and dual axis 180° twist, to adjust the viewing angle to the desired direction. With this unique 3-axis

positioning system, installers can capture images from virtually any angle, without compromising

performance.

This Manual: http://www.manuallib.com/file/2673673

Loosen this screw manually to

rotate the camera 180°

Use a screw driver to loosen this

screw. Tilt the camera 180°

Hold the bracket at both sides of the

camera. Rotate the entire camera

180°

Table of Contents