Table of Contents
Advertisement
Computer feet
The computer feet are adhesive-backed rubber pads. There are 3 rubber feet that attach to the base
enclosure in the locations illustrated below. The feet (1) that cover two screws are round. The foot along the
front of the computer (2) is long and thin. All 3 feet are available in the Rubber Kit, spare part number
806754–001.
Base enclosure
Description
Base enclosure in natural silver finish
Base enclosure in sunset red finish
Base enclosure in cobalt blue finish
Base enclosure in peachy pink finish
Base enclosure in violet purple finish
Base enclosure in blizzard white finish
IMPORTANT:
and replacement.
Before removing the base enclosure, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the bottom corner covers:
1.
Remove the two Phillips PM2.5×7.2 screws (1) that secure the bottom corner covers.
Make special note of each screw and screw lock size and location during removal
Battery on page
29).
Component replacement procedures
Spare part number
806738-001
806739-001
806740-001
806741-001
806742-001
806743-001
33
Advertisement
Table of Contents
