Radio Shack Child Guidance 60-2794 Owner's Manual

RC School Bus
60-2794
Step One
Installing Batteries
You will need...
Four AA batteries for the car
One 9V battery for the transmitter
Phillips screwdriver
Put AA Batteries in the School Bus
• Slide the L/OFF/H switch on the bottom
of the School Bus to OFF.
• Loosen the screw on the battery compart-
ment with a Phillips screwdriver and turn
the latch on the side of the battery compartment clockwise to unlock it.
• Remove the battery compartment box from battery compartment.
• Insert four AA batteries and match the + and - signs with the product.
• Replace the box and turn the latch counterclockwise to lock it in place.
Then, secure it with a screw.
Put 9V Battery in Transmitter
• Remove the scew on the battery com-
partment cover with a Phillips screw-
driver and slide the cover off to remove
it.
• Insert one 9V battery and match the +
and - signs with the product.
• Replace the cover and secure with the
screw.
What's Included
School Bus
Transmitter Owner's Manual
Step Two
Driving the School Bus
• Slide the L/OFF/H switch on the back of
the School Bus to L (Low) or H (High) to
select the volume level for the melody.
• Press the upright arrow on your transmitter
to drive forward.
• Press the circle arrow to drive the School
Bus backward and in a circle.
• Release the buttons to stop the School
Bus.
When the School Bus is moving forward, the passengers move
from side to side while listening to the melody that plays. No
melody is heard when moving backward.
Forward
Backward and
in a circle