Remote Access Control - Draytek vigor2960 series User Manual

4 . 9 . 3 R e m o t e
4 . 9 . 3 R e m o t e
Enable the necessary VPN service as you need. If you intend to run a VPN server inside your
LAN, you should disable the VPN service (e.g., PPTP VPN, L2TP VPN, SSL VPN, IPsec
etc.) of Vigor Router to allow VPN tunnel pass through.
Available parameters are listed as follows:
Item
Enable PPTP/L2TP
VPN Service /
Enable SSL Tunnel
/IPsec Service
IPsec Remote Dial-In
Service
Apply
Cancel
Vigor2960 Series User's Guide
A c c e s s C o n t r o l
A c c e s s C o n t r o l
Description
Check the box(es) to enable the service.
Choose one of the services by clicking on the radio button.
Click it to save the configuration.
Click it to discard the settings configured in this page.
313