Draytek vigor2960 series User Manual page 260

Use mOTP
SSL Proxy
SSL Application (VNC)
SSL Application (RDP)
PPPoE Server
Allow PPPoE Server
Login
Quota Reset Frequency
Time Quota (min)
Current Time Used
(min)
Traffic Quota(MB)
Click Enable to make the authentication with mOTP
function.

mOTP PIN Code - Type the code for authentication
(e.g, 1234).

mOTP Secret - Use the 32 digit-secret number
generated by mOTP in the mobile phone (e.g.,
e759bb6f0e94c7ab4fe6).
It is available when System User is set with false. The
web proxy over SSL will be applied for VPN.
To clear the selected one, click
object selections.
It is available when System User is set with false.
Choose one of the SSL Application profiles (VNC) for
applying into this profile.
To clear the selected one, click
object selections.
It is available when System User is set with false.
Choose one of the SSL Application profiles (RDP) for
applying into this profile.
To clear the selected one, click
object selections.
Click Enable to activate related PPPoE configuration.
It is used to configure the cycle time for PPPoE quota.
Note that each time when the quota is reset, the value of
Current Time Used/Current Traffic Quota will be reset
to initial situation (0).

Everyday – The quota for PPPoE will be reset every
day.

Everymonth – The quota for PPPoE will be reset
every month.
Type a time quota for PPPoE connection.
Note: The range of Time Quota is 1~14400 minutes.
Display the cumulative amount of time that the user
used.
Reset - Click it to reset the setting to default value (0).
It is used to set the maximum traffic (MB) for such user
profile.
252
to remove current
to remove current
to remove current
Vigor2960 Series User's Guide