Exterior Lamp Switch; Active Bi-Xenon Headlamps; Lighting - Mercedes-Benz 2010 E-Class Sedan Operator's Manual

Storing positions into memory
X
Adjust the seats.
X
On the driver's side, also adjust the
steering wheel and exterior rear view
mirrors to the desired positions.
X
Press memory button M once and within
3 seconds press memory position button
1, 2 or 3.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.
Recalling positions from memory
X
Press and hold desired memory position
button 1, 2 or 3 until the seat has moved
to the stored position completely. On the
driver's side, also wait for the steering
wheel and exterior rear view mirrors to
move to the stored position.
i Releasing the memory position button
stops movement to the stored positions
immediately.

Lighting

Notes
i If you drive in countries with left-hand
driving, you must have the headlamps
5 When the parking lamps are on, the tail lamps, the license plate lamps, the side marker lamps, and the
instrument cluster illumination are also on.
modified for symmetrical low beams.
Relevant information can be obtained at
any authorized Mercedes-Benz Center.
i Vehicles equipped with active Bi-Xenon
headlamps:
The active Bi-Xenon headlamps increase
usable illumination over conventional
headlamps because they follow the
curvature of the road ahead. The beams of
the active Bi-Xenon headlamps shift to
either side according to the vehicle's
steering angle and speed.

Exterior lamp switch

Standing lamps, left
1 W
Standing lamps, right
2 X
Parking lamps
3 T
Daytime running lamp mode
Automatic headlamp mode
4 c
Daytime running lamp mode
Low-beam headlamps or high-beam
5 L
headlamps
Vehicles with front fog lamps: Rear
B R
fog lamp
Vehicles with front fog lamps: Front
C N
fog lamps
i The exterior lamps (except standing
lamps or parking lamps) go out
automatically when you remove the
SmartKey from the starter switch or open
Lighting
5
Z
97