Multifunction Display - Mercedes-Benz 2010 E-Class Sedan Operator's Manual

Control system
128
serve to call up relevant information or to
customize the settings for your vehicle.
It is helpful to think of the menus, and the
functions within each menu, as being
arranged in a circular pattern.
In the Sett. menu, instead of functions, you
will find a number of submenus for calling up
and changing settings. For instructions on
using these submenus, see "Settings menu"
Y
( page 139).
The number of menus available in the system
depends on which optional equipment is
installed in your vehicle.
Using the control system
X
To select a menu: Press button =
or ;.
X
To select a submenu: Press button :
or 9.
X
To go to the next higher menu level:
Press button %.
X
To select the standard display: Press
button % repeatedly until the standard
display featuring the odometer and
speedometer appears.
or
X
Press and hold button % until the
standard display featuring the trip
odometer and the main odometer appears.
X
To confirm selection: Press button a.
X
To confirm display message: Press
button a or %.
The control system saves certain display
messages. Calling up display messages
( Y page 139).
For information about warning and
malfunction messages appearing in the

multifunction display (

Multifunction display
Text field
:
Line for main menus
;
Automatic transmission program mode
=
indicator
Transmission position/gear range
?
indicator
Outside temperature indicator/additional
A
speedometer
Settings, functions, submenus as well as any
malfunctions appear in the text field.
For more information on menus displayed in
the multifunction display, see "Menus and
submenus" ( Y page 129).
i
E 63 AMG: The lower part of the
multifunction display will vary from the the
multifunction display shown. For more
information, see ( Y
Y
page 272).
page 118).