Service; Service Menu - Mercedes-Benz 2010 E-Class Sedan Operator's Manual

Control system
138
X
Press button a again if you would like
to change the current status.
After the function has been activated, the
®
PRE-SAFE Brake indicator Ä appears
in the lower part of the multifunction
display. When the HOLD function is
switched on, the PRE-SAFE
indicator Ä will not appear.
For more information on PRE-SAFE
see ( Y page 69).
Switching ATTENTION ASSIST on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Attention Asst. function
X
Press button a.
X
Press button a again if you would like
to change the current status.
After the function has been activated, the
ATTENTION ASSIST indicator À appears
on the left-hand side of the multifunction
display.
For more information on ATTENTION ASSIST,
see ( Y page 178).
Switching Blind Spot Assist on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Blind Spot Asst. function
X
Press button a.
®
Brake
X
Press button a again if you would like
to change the current status.
®
Brake,
Depending on the previous status, Blind
Spot Assist: will be Enabled or
Disabled.
For more information on Blind Spot Assist,
see (
Switching Lane Keeping Assist on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Lane Keep. Asst. function
X
Press button a.
X
Press button a again if you would like
to change the current status.
After the function has been activated, the
Lane Keeping Assist indicator Ã
appears in the lower part of the
multifunction display.
For more information on Lane Keeping
Assistance, see (

Service menu

In the Serv. menu the following functions are
available:
Y page 175).
Y page 177).