Taking care of your machine
IMPORTANT: Allow the steam mop to fully cool down before performing any maintenance or troubleshooting checks
Don't leave water or detergent in the tanks between uses, as this can effect the machines performance.
The water/detergent tanks need to be emptied and rinsed after each use.
Emptying the water tank
Press the water tank
release button and lift the
water tank by the handle
Emptying the detergent tank
Push both detergent tank
release buttons and lift
to remove
Removing cleaning pads
Hold corner of pad down with
foot and lift steam mop to
peel away
Pull the tab on the water
Empty any excess water
tank to open
over the sink
Twist detergent tank cap
Empty any excess
anti-clockwise and lift
detergent over the sink
to remove
Max 40°C
All cleaning pads are machine
washable (Max 40'C) allow to
fully dry before use
Rinse water tank with water and
replace water tank tab, push firmly
to close before replacing back onto
the machine
Rinse detergent tank with water
and replace detergent tank cap,
turn clockwise to tighten before
replacing back onto the machine