Pptp Or L2Tp Connection - D-Link DIR-615 User Manual

DIR-615 Wireless N 300 Router
User Manual

PPTP or L2TP Connection

In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password to connect to a remote server.
In the VPN server address field, enter the IP or URL address of the PPTP or L2TP
authentication server.
As a rule, the specified settings are enough to configure a protected connection (the VPN tunnel). If
you need to specify additional settings, open the expert settings mode. To do this, use the switch in
the bottom left corner of the page.
Figure 36. Configuring PPTP WAN connection.
Page 49 of 172
Configuring via Web-based Interface