Lan - D-Link DIR-615 User Manual

DIR-615 Wireless N 300 Router
User Manual

LAN

To configure the router's local interface, proceed to the Net / LAN page.
If needed, edit the basic settings of the local interface.
Parameter
IP Address
Netmask
When needed settings are configured, click the Save button.
In the DHCP server section, you can configure the built-in DHCP server of the router.
Figure 87. Basic settings of the local interface.
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
Figure 88. The section for configuring the DHCP server.
Page 110 of 172
Configuring via Web-based Interface
Description