Net; Wan - D-Link DIR-615 User Manual

DIR-615 Wireless N 300 Router
User Manual

Net

In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).

WAN

On the Net / WAN page, you can create and edit connections used by the router.
By default, the WAN connection is configured in the system. It is assigned to the INTERNET port
of the router. You can edit this connection or delete it.
To create a new connection, click the Add button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the Save button.
To delete an existing connection, left-click the relevant line in the table. On the page displayed,
click the Delete button.
To use one of existing WAN connections as a default gateway, select the choice of the Default
gateway radio button located in the line corresponding to this connection.
Figure 68. The Net / WAN page.
Page 85 of 172
Configuring via Web-based Interface