Table of Contents
Advertisement
Selecting MP3-CD track
Turn on COMAND and select MP3-CD.
Refer to the separate COMAND operat-
ing instructions.
Press button è or ÿ repeatedly
until the settings for the MP3-CD cur-
rently being played appear in the right
multifunction display.
1 Current track
Press button k or j repeatedly
until the desired track is selected.
NAV menu
The
NAV
menu contains the functions need-
ed to operate your navigation system.
Press button è or ÿ repeatedly
until you see the message
left multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
With COMAND switched off, the mes-
sage
NAV off
appears in the
multifunction display.
With COMAND switched on but route
guidance not activated, the direction of
travel and, if applicable, the name of
the street currently traveled on appear
in the multifunction display.
With COMAND switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND manual for in-
structions on how to activate the route
guidance system.
Distronic* menu
NAV
in the
Use the
Distronic
display the current settings for your Dis-
tronic system. The information shown in
the multifunction display depends on
whether the Distronic system is activated
or deactivated.
Please refer to the "Driving systems" sec-
tion of this manual ( page 213) for in-
structions on how to activate Distronic.
Press button è or ÿ repeatedly
to select the
multifunction display.
Controls in detail
Control system
menu ( page 217) to
Distronic
menu in the
151
Advertisement
Table of Contents
