Table of Contents
Advertisement
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to posi-
tion M ( page 128).
Open the trunk ( page 111).
Tail lamp unit
1 Backup lamp
2 Driver's side: Rear fog lamp
Passenger's side: Substitute lamp
3 Turn signal lamp
402
Fold the trim to the side and remove it.
Turn the bulb socket counterclockwise
and pull it out.
Gently push the bulb into the socket,
turn it counterclockwise and remove it.
Insert the new bulb and reinstall the
bulb socket.
The bulb socket should audibly click
into place.
Reinstall the trim.
License plate lamp
1 Screws
Loosen both screws 1.
Remove the license plate lamp.
Replace the bulb.
Reinstall the license plate lamp.
Retighten screws 1.
Advertisement
Table of Contents
