Table of Contents
Advertisement
Setting the current speed
Accelerate or decelerate to the desired
speed.
Briefly lift the cruise control lever in
direction of arrow 1 or depress in
direction of arrow 2 ( page 218).
Distronic is activated and the current
speed is set.
Remove your foot from the accelerator
pedal.
i
If you do not take your foot off of the accel-
erator but continue to accelerate past the set
speed, the following message will appear in the
multifunction display:
DTR override.
The distance to slower moving vehicles in front
of you will not be set. Your vehicle speed will
then be determined only by the accelerator
pedal position.
Setting a higher speed
Briefly tip the cruise control lever in
direction of arrow 1 ( page 218) to
increase the vehicle speed in incre-
ments of 5 mph (Canada: 10 km/h).
The new speed is set.
i
Depressing the accelerator pedal does not
deactivate Distronic. After brief acceleration
(e.g. for passing), the cruise control will resume
the last speed set.
Controls in detail
Driving systems
Setting a lower speed
Briefly tip the cruise control lever in di-
rection of arrow 2 ( page 218) to de-
crease the vehicle speed in increments
of 5 mph (Canada: 10 km/h).
The new speed is set.
i
When you use the cruise control lever to de-
celerate, the brakes will be applied to support
deceleration.
In addition, the transmission will automatically
downshift on long downhill grades.
Fine adjustment in 1 mph
(Canada: 1 km/h) increments
Faster
Briefly pull the cruise control lever in
direction of arrow 4 ( page 218).
219
Advertisement
Table of Contents
