Controls in detail
Loading
Cargo compartment cover blind
The cargo compartment cover blind can be
installed behind the rear seat bench.
1 Rear seat bench cover blind
2 Tailgate cover blind
214
Rolling out blind
Grip the blind strap and pull blind 1
forward across the cargo compart-
ment.
Engage blind into the mounts on the
rear seat backrest and release.
Grip the blind strap and pull blind 2
rearward across the cargo compart-
ment.
Engage blind into the mounts to the left
and right of the tailgate.
Rolling up blind
Disengage blind 1 from the mounts
on the rear seat backrest and guide
retraction by its blind strap.
Disengage blind 2 from the mounts to
the left and right of the tailgate and
guide retraction by its blind strap.
Removing and installing blind
1 Latch
2 Blind
Removing blind
Roll the blind up ( page 214).
Open latch 1 on the right and left side
of blind 2 in direction of the arrow.
Pull blind 2 out upwards.
Installing blind
Place blind into recesses.
Press the right and left side of blind
down until blind locks into place.