Table of Contents
Advertisement
Warning!
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a
reminder with respect to the operation of
certain systems and do not replace the
owner's and/or driver's responsibility to
maintain the vehicle's operating safety by
having all required maintenance and safety
checks performed on the vehicle and by
bringing the vehicle to an authorized
Mercedes-Benz Light Truck Center to
address the malfunction and warning
messages ( page 338).
Press button è or ÿ repeatedly
until the vehicle status message
memory appears in the multifunction
display.
If conditions have occurred causing status
G
messages to be recorded, the number of
messages appears in the multifunction
display:
1 Number of messages
Press button k or j.
The stored messages will now be
displayed in the order in which they
have occured. For malfunction and
warning messages, see "Vehicle status
messages in the multifunction display"
( page 338).
Controls in detail
Control system
i
After you have scrolled through all recorded
status messages, the first recorded message
appears again.
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch.
i
The vehicle status message memory will be
cleared when you turn the SmartKey in the
starter switch to position 1 or 2. You will then
only see high-priority messages in the
multifunction display ( page 338).
145
Advertisement
Table of Contents
