Table of Contents
Advertisement
Getting started
Driving
Intermittent wiping
Set the combination switch to
position I.
i
Intermittent wiping is interrupted when
the vehicle is at a standstill and a front
door is opened.
Single wipe
Press combination switch briefly in
direction of arrow 1.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
Push combination switch in direction of
arrow 1 past the resistance point.
The windshield wipers operate with
washer fluid.
For information on filling up the washer
reservoir, see "Windshield/rear window
washer system and headlamp cleaning
system" ( page 245).
54
!
If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.
For safety reasons, withdraw
SmartKey from starter switch be-
fore attempting to remove any
blockage.
Remove blockage.
Turn the windshield wipers on
again.
If windshield wipers fail to function at
all in combination switch position I,
set the combination switch to the
next highest wiper speed.
have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Light Truck Center.
Rear window wiper/washer
The rear window wiper/washer switch is
located on the upper part of the center
console.
1 Interval wiping on/off
2 Indicator lamp
3 Simultaneous operation of wiper and
washer
Advertisement
Table of Contents
