Table of Contents
Advertisement
4 Securing screw (front fog lamp)
5 Adjusting screw (front fog lamp)
Removing
Loosen and remove securing
screws 1.
Remove front fog lamp trim panel 2
and seal.
Loosen and remove front fog lamp-se-
curing screws 4.
Remove front fog lamp 3.
Installing
Insert front fog lamp 3 and install and
tighten front fog lamp-securing
screws 4.
Reinstall seal and front fog lamp trim
panel 2.
Install and tighten securing screws 1.
Practical hints
Replacing bulbs
Front fog lamp bulb
6 Electrical connector
7 Retainer spring
8 Bulb socket
Pull off electrical connector 6.
Unclip retainer spring 7.
Pull out bulb socket 8.
Insert the new bulb so that the base
locates in the recess on the holder.
Clip in retainer spring 7.
Plug electrical connector 6 together.
339
Advertisement
Table of Contents
