Mercedes-Benz 2005 G 500 Operator's Manual page 137

Selecting display (speed display or out-
side temperature)
Move the selection marker with
the æ or ç button to the
INSTRUMENT CLUSTER submenu.
Press button j or k repeatedly
until you see this message in the dis-
play: SELECT DISPLAY .
The selection marker is on the current
setting.
Press æ or ç to select the dis-
play permanently shown in the multi-
function display.
Lighting submenu
Access the LIGHTING submenu via the
SETTINGS menu. Use the LIGHTING
menu to change the lamp and lighting set-
tings on your vehicle. The following
functions are available:
Function
Setting daytime running lamp
mode (USA only)
Setting locator lighting
Setting night security
illumination
Setting interior lighting delayed
shut-off
Controls in detail
Setting daytime running lamp mode
(USA only)
i
sub-
This function is not available in coun-
tries where the daytime running lamp
mode is mandatory and therefore in a
constant mode.
Page
137
Move the selection marker with
the æ or ç button to the
138
submenu.
LIGHTING
139
Press button j or k repeatedly
until you see this message in the dis-
140
play: LIGHT CIRCUIT HEADLIGHT MODE
Control system
.
137