Table of Contents
Advertisement
Switching off rapid seat heating
Press lower switch position 2 again.
i
If one or both of the lamps on the seat
heater switch are blinking, there is in-
sufficient voltage available as too many
electrical consumers are turned on.
The seat heater switches off automati-
cally.
The seat heater will switch back on
again automatically as soon as suffi-
cient voltage is available.
Rear seats
The switch is located on the B (center) pil-
lar.
1 Normal heating
2 Rapid heating
Make sure the ignition is switched on.
All the lamps in the instrument cluster
come on.
Controls in detail
Switching on seat heating
Press upper switch position 1.
A red indicator lamp on the switch
comes on.
Switching off seat heating
Press upper switch position 1 again.
i
The seat heater will be automatically
switched off after approximately
30 minutes.
Switching on rapid seat heating
Press lower switch position 2.
Both red indicator lamps on the switch
come on.
i
The system switches over to normal
heating mode after approximately five
minutes. Only one indicator lamp re-
mains lit.
Seats
99
Advertisement
Table of Contents
