Mercedes-Benz 2004 G 500 Operator's Manual page 135

Setting key-dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the exterior mirrors should be
stored separately for each SmartKey
( page 101).
Move the selection marker with
the æ or ç button to the
NIENCE submenu.
Press button j or k repeatedly
until you see this message in the dis-
play:
SETTINGS KEY-DEPENDENT
The selection marker is on the current
setting.
Press æ or ç to set key depen-
dency to or .
ON OFF
i
For safety reasons, resetting the
TINGS KEY-DEPENDENT
tory settings will not reset while
driving.
In the display you will then see the mes-
sage: CONVENIENCE – CANNOT BE TO-
TALLY RESET TO FACTORY SETTINGS
CONVE-
.
WHILE DRIVING
Setting parking position for exterior rear
view mirror
.
Use the MIRROR SETTING WHEN PARKING
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gear is engaged. For
more information, see "Activating exterior
rear view mirror parking position"
( page 153).
Move the selection marker with
the æ or ç button to the
SET-
submenu.
NIENCE
submenu to fac-
Press button j or k repeatedly
until you see this message in the dis-
play:
MIRROR SETTING WHEN PARKING
The selection marker is on the current
setting.
Press æ or ç to switch function
ON or OFF
Controls in detail
Control system
CONVE-
.
.
135