Table of Contents
Advertisement
Controls in detail
Control system
i
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
For safety reasons, resetting the
LIGHTING
submenu to factory settings
( page 123) will not reset the daytime
running lamp mode.
In the display you will then see the mes-
sage:
LIGHTING – CANNOT BE TOTALLY
RESET TO FACTORY SETTINGS WHILE
DRIVING
.
130
Setting locator lighting
During darkness, the following lamps will
come on when the exterior lamp switch is
in position U, the locator lighting fea-
ture is activated, and the vehicle is un-
locked by SmartKey:
parking lamps
tail lamps
license plate lamps
front fog lamps
The locator lighting switches off when the
driver's door is opened. It switches off au-
tomatically after a period of approximately
40 seconds.
Move the selection marker with
the æ or ç button to the
submenu.
LIGHTING
Press button j or k repeatedly
until you see this message in the dis-
play:
.
LOCATOR LIGHTING
The selection marker is on the current
setting.
Press æ or ç to select the de-
sired setting.
The locator lighting will be switched on
or off.
Advertisement
Table of Contents
