Table of Contents
Advertisement
i
To select the reverse side of the tape,
press button below track number on
the audio system display, or enter re-
quest on the COMAND* system locat-
ed in the center dashboard.
NAV menu
The
menu contains the functions need-
Nav
ed to operate your navigation system.
Press button è or ÿ repeatedly
until you see the message
Nav
display.
If the navigation system is switched off,
the message
is shown in the
Nav off
display.
If the navigation system is on, the mes-
sage
Nav active
is shown in the dis-
play.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
Distronic* menu
Use the Distronic menu to display the cur-
rent settings for your Distronic system.
What information is shown in the display
depends on whether the Distronic system
is active or inactive.
Please refer to the "Driving systems" sec-
tion of this manual ( page 221) for in-
structions on how to activate Distronic.
Press button è or ÿ repeatedly
until you see one of the following two
pictures in the display.
in the
Controls in detail
Control system
Distronic deactivated
When Distronic is deactivated you will see
the standard display in the display.
1 Vehicle ahead, if detected
2 Actual distance to vehicle ahead
3 Preset distance threshold to vehicle
ahead
4 Your vehicle
5 Symbol for activated distance warning
function
137
Advertisement
Table of Contents
