Table of Contents
Advertisement
Obtain crank 3.
Insert crank 3 through hole.
Turn crank 3 clockwise to:
slide roof closed
raise roof at the rear
Turn crank 3 counterclockwise to:
slide roof open
lower roof at the rear
The sliding/pop-up must be resynchro-
nized after being operated manually
( page 349).
Synchronizing the sliding/pop-up roof
Take the fuse for the sliding/pop-up
roof out of the main fuse box
( page 372).
Reinsert the fuse.
Switch on the ignition.
Press the switch in the "raise" direction
until the sliding/pop-up roof is fully
raised at the rear.
Hold the switch for approximately one
second.
The sliding/pop-up roof is adjusted.
Practical hints
Opening/closing in an emergency
349
Advertisement
Table of Contents
