Display Assembly - HP ProBook 4445s Maintenance And Service Manual

Display assembly

All display assemblies include WLAN antenna transceivers and cables.
For a list of individual display spare parts, see
Description
35.6-cm (14.0-inch), Anti-glare, without webcam
35.6-cm (14.0-inch), Anti-glare, with webcam
35.6-cm (14.0-inch), BrightView, without webcam
35.6-cm (14.0-inch), BrightView, with webcam
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Bottom door (see
c. Hard drive (see
d. Optical drive (see
e. Memory (see
f. WLAN module (see
g. Keyboard (see
h. Metal heat shield (see
i. Fan (see
j. Top cover (see
k. System board (see
Battery on page 38)
Bottom door on page
Hard drive on page
Optical drive on page
Memory modules on page
WLAN/Bluetooth combo card on page
Keyboard on page
Metal heat shield on page
Fan on page 52)
Top cover on page
System board on page
Display components on page
39).
43)
40)
45)
49)
51)
53)
66)
Component replacement procedures
25.
Spare part number
683785-001
683786-001
683787-001
683788-001
47)
77