Hard Drive - HP ProBook 4445s Maintenance And Service Manual

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket and screws.
Description
750-GB, 7200 rpm hard drive (2.5 in)
750-GB, 5400 rpm hard drive (2.5 in)
640-GB, 5400 rpm hard drive (2.5 in)
500-GB, 7200 rpm hard drive (2.5 in)
500-GB, 5400 rpm hard drive (2.5 in)
320-GB, 7200 rpm hard drive (2.5 in)
320-GB, 5400 rpm hard drive (2.5 in)
Hard Drive Hardware Kit (includes hard drive bracket, mylar insulator, and screws)
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the bottom door (see
Remove the hard drive:
1. Position the computer upside-down, with the battery bay toward you.
2. Remove the four Phillips PM2.5×4.0 screws (1) that secure the hard drive to the computer.
Battery on page 38).
Bottom door on page 39).
Component replacement procedures
Spare part number
633252-001
634250-001
669300-001
634925-001
669299-001
641672-001
622643-001
683488-001
43