I/O Connectors; S/Pdif Connector And Front Audio - Contec GMB-C2160-LLVA User Manual

I/O Connectors

S/PDIF Connector and Front audio

Front audio
9
1
10 2
S/PDIF
1
5
+5V
SPDIF in
Ground
Key
SPDIF out
The S/PDIF connector is used to connect an external S/PDIF port. Your S/PDIF
port may be mounted on a card-edge bracket. Install the card-edge bracket to
an available slot at the rear of the system chassis then connect the audio cable
to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1
of the S/PDIF connector.
Front Audio
The front audio connector allows you to connect to the second line-out and mic-
in jacks that are at the front panel of your system.
Hardware Installation
2
43