6.
Before installing the motherboard
into the chassis, locate the standoffs
that should match the eight (8) CEK
spring screw holes.
7.
Install the motherboard with the
external I/O ports toward the
chassis rear panel. The CPU
sockets should be right on top of
their respective standoffs.
Make sure that the standoffs perfectly match the CEK spring screw holes;
otherwise, you can not install the CPU heatsinks properly.
Secure the motherboard with six (6) screws. Refer to section 2.2.2 Screw
8.
holes for illustration.
ASUS DSBV-DX Series
Standoffs for CPU1
Standoffs for CPU2
Socket for CPU2
Socket for CPU1
2-5