Integrated Striping (Is) Volume - Asus DSBV-DX User Manual
Dsbv-dx series
Hide thumbs
Also See for DSBV-DX:
- Hardware manual (2 pages) ,
- Hardware manual (2 pages) ,
- Approved vendor list (2 pages)
Table of Contents
Advertisement
5.5.3
Integrated Striping (IS) volume
Overview
The Integrated Striping (IS) feature provides RAID 0 functionality, supporting
volumes with two to eight disks. You may combine an IS volume with an IM or IME
volume.
Creating Integrated Striping volumes
DO NOT combine Serial ATA and SAS disks in one volume.
To create an IS volume:
1.
Turn on the system after installing all SAS hard disk drives.
2.
During POST, press <Ctrl+C> to enter the SAS configuration utility.
LSI Logic Corp. MPT SAS BIOS
MPTBIOS-6.08.05.00 (2006.08.02)
Copyright 2000-2006 LSI Logic Corp.
Adapter(s) disabled by user
Press Ctrl-C to start LSI Logic Configuration Utility...
The Adapter Properties screen appears.
3.
Use the arrow keys to select RAID Properties, then press <Enter>.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVIDIA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu
Enter = Select Item -/+ = Change Item
ASUS DSBV-DX Series
SAS1068
00
05.03.00
1.15.00.00-IR
500E0180:60831008
25.02
Disabled
0
(Enabled OS only)
F1/Shift+1 = Help
5-45
Advertisement
Table of Contents
