Motherboard Overview; Placement Direction; Screw Holes - Asus DSBV-DX User Manual
Dsbv-dx series
Hide thumbs
Also See for DSBV-DX:
- Hardware manual (2 pages) ,
- Hardware manual (2 pages) ,
- Approved vendor list (2 pages)
Table of Contents
Advertisement
2.2
Motherboard overview
Before you install the motherboard, study the configuration of your chassis to
ensure that the motherboard fits into it.
To optimize the motherboard features, we highly recommend that you install it in an
SSI CEB 1.1 compliant chassis.
Make sure to unplug the chassis power cord before installing or removing
the motherboard. Failure to do so can cause you physical injury and damage
motherboard components!
2.2.1
Placement direction
When installing the motherboard, make sure that you place it into the chassis in the
correct orientation. The edge with external ports goes to the rear part of the chassis
as indicated in the image below.
2.2.2
Screw holes
Place six (6) screws into the holes indicated by circles to secure the motherboard
to the chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
2-2
Chapter 2: Hardware information
Advertisement
Table of Contents
