Electro-Voice Dx46 Owner's Manual page 23

F
IRMWARE
This window displays the firmware version currently running on the Dx46.
IP
This window displays the IP address and network mask of the Dx46.
Use the < SELECT > buttons to navigate to the Address parameter. Use the VALUE up/down buttons to edit the
IP address of the Dx46. Use the < SELECT > buttons to navigate to the Mask parameter. Use the VALUE up/down
buttons to edit the subnet mask of the Dx46. Following table shows the default values of the ethernet interface.
DEVICE INFO
This window shows the on-time and the unique MAC addresss of the Dx46. The MAC address can not be changed.
LOCK
This window allows locking the Dx46. Please see "Lock - Front Panel Access" on page 25 for details.
E
DITING
This window allows selecting the edit mode (Standard or Full).
The Dx46 defaults to Standard Edit mode wherein input and output channel parameters are appropriately linked. In
Full Edit mode, no parameter links are enforced, regardless of the configuration selected. Use the < SELECT > but-
tons to navigate to the Edit Mode parameter. Use the VALUE up/down buttons to choose your editing preferences.
Setup: FIRMWARE
Electro-Voice Dx46 V1.0.0
Setup: IP
Address:10.30.3.239
Mask:255.255.254.0
Parameter
IP address
Subnet mask
Gateway
Table 4-1: Default settings of the ethernet interface
Setup: DEVICE INFO
Ontime: 10days 00h 22m 07s
MAC-Address: 00-0b-7c-ff-fe-26
Setup: LOCK
Mode: Unlocked
Code: 0000 Press 'Store' to Lock
Setup: EDITING
Edit Mode: Full
Link: Off
Value
192.168.1.100
255.255.255.0
192.168.1.1
D 46
X
23