Electro-Voice Dx46 Owner's Manual page 12

E -V
LECTRO OICE
Setting the correct Delay value is important to avoid acoustic cancellation of signals. E.g. when using the two full-
range channels of the configuration "2way + FR" as delay lines, the Delay of this two channels has to be adjusted
according to the distance to the main PA.
If all connected speakers are used as a delay line, or the main PA should be moved acoustically „back to the stage",
the input delay parameter of input channels A and/or B should be used in this cases. Press the USER Delay button
to use the input delay, up to 2 seconds of delay are available for each input.
C E
ONFIGURE QUALIZER
Use the GEQ (31 band) and PEQ (10 band) of each input channel for adjusting the sound of your system to your
room characteristics. Press the USER PEQ or GEQ button to open the equalizer dialogs.
12
OUT 1:Output Delay
Delay: 7.0
Unit: ms
IN A:PEQ1
Type: Hipass
Slope: 12dB/oct
IN A:GEQ
F:20Hz Gain:0.0dB
Type: Symmetric Q
Active
Active
F: 20000.0Hz
Q: 2.0
Detail
Active
Q: 4.3