Power Supply - MSI MS-7520 ECLIPSE Series User Manual

M S-7520 M ainboard

Power Supply

ATX 24-Pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply.
To connect the ATX 24-pin power supply, make sure the plug of the
power supply is inserted in the proper orientation and the pins are
aligned. Then push down the power supply firmly into the connector.
You may use the 20-pin ATX power supply as you like. If you'd like
to use the 20-pin ATX power supply, please plug your power sup-
ply along with pin 1 & pin 13 (refer to the image at the right hand).
12
JPWR1
1
ATX 12V Power Connector: JPWR2
This power connector is used to provide power to the CPU.
4
JPWR2
1
Important
1. Make sure that all the connectors are connected to proper ATX power sup-
plies to ensure stable operation of the mainboard.
2. Power supply of 450 watts (and above) is highly recommended for system
stability.
3. ATX 12V power connection should be greater than 18A.
2-16
Pin Definition
PIN SIGNAL
24
1 +3.3V
2 +3.3V
3 GND
4 +5V
5 GND
6 +5V
7 GND
8 PWR OK
9 5VSB
10 +12V
11 +12V
13
12 +3.3V
8
PIN SIGNAL
1
2
5
3
4
PIN SIGNAL
13 +3.3V
14 -12V
15 GND
16 PS-ON#
17 GND
18 GND
19 GND
20 Res
21 +5V
22 +5V
23 +5V
24 GND
Pin Definition
PIN SIGNAL
GND
5 +12V
GND
6 +12V
GND
7 +12V
GND
8 +12V
pin 13
pin 12