MSI MS-7520 ECLIPSE Series User Manual page 21

M S-7520 M ainboard
9. Align the holes on the mainboard with
the heatsink. Push down the cooler
until its four clips get wedged into
the holes of the mainboard.
locking switch
Important
1. Read the CPU status in BIOS.
2. Whenever CPU is not installed, always protect your CPU socket pin with the
plastic cap covered (shown in Figure 1) to avoid damaging.
3. Mainboard photos shown in this section are for demonstration of the CPU/
cooler installation only. The appearance of your mainboard may vary depend-
ing on the model you purchase.
2-6
10. Turn over the mainboard to confirm
that the c lip-ends are c orrectly
inserted.
Mainboard
Hook