Rear Seats; Split Folding Rear Seat - Chevrolet 2011 HHR Owner's Manual

To raise the seatback to the upright position:
1. Pull up on either lever.
2. Push the seatback up and to the rear until it locks
in place.
WARNING:
If either seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatbacks to be sure they
are locked.
3. Push and pull on the seatback to make sure it is
locked.
2-12

Rear Seats

Split Folding Rear Seat

On vehicles with a rear seat, the seatbacks can be
folded flat.
To lower the rear seatback(s):
1. Move the front seat forward and/or put the front
seatback in an upright position so it does not
interfere with folding the rear seatback forward.
2. Open the rear door while the vehicle is parked.
3. The rear head restraint may need to be removed if
it interferes with the front seat when the front seat
is moved back in place. If removed, store the head
restraint where it cannot move while the vehicle is
in motion.
Notice: Folding a rear seat with the safety belts
still fastened may cause damage to the seat or the
safety belts. Always unbuckle the safety belts and
return them to their normal stowed position before
folding a rear seat.
I n f o r ma t i o n P r o v i d e d b y :