Panasonic EP-MA10 Operating Instructions Manual page 43

5. Check the unit
1
4
6. Adjusting for correct pillow height
Adjust the pillow height so that the bottom edge of the pillow is at
ear level.
• If positioned too low, the pillow can lessen the effect of massage around the neck area.
• To firmly massage your neck and shoulders, flip up the pillow.
7. Adjusting the reclining angle
1
Press the button on the control panel to turn on the power.
2
Press and
• With either button held down, movement will continue until a "beep-beep-beep" sound indicates the legrest or backrest has
been raised or lowered as far as possible.
• The legrest will start to move shortly after the backrest.
Approx. 85˚
* The reclining operation is a function that adjusts the angle of the backrest and legrest. Avoid using it for any other purposes,
such as continuous up/down operation etc.
If the power switch is set to "off" or the power plug is disconnected
from the electrical outlet with the massage heads not in the retracted
position, the massage heads may automatically return to the
retracted position when
A display shown to the right may appear, but this is not a malfunction.
You will be able to use the unit normally after the massage heads
stop moving.
3
1
Make sure the covering is free of rips or tears.
2
Make sure there are no obstacles between
the parts of the unit.
3
Make sure the massage heads are in the
retracted position, i.e. they are parked to the
left and right in the upper part of the backrest.
If not retracted, press
retracted position.
4
Make sure the legrest is lowered.
•
See Warning No. 8 on page 1 and No. 7 and 13 on page 2.
to adjust the angle of the backrest and legrest.
Approx. 0˚
is pressed next time you use the unit.
twice to return the massage heads to the
Do not sit on the legrest when it is raised. Doing so may cause it to
collapse down or bend the legrest. The legrest is not meant to
support full body weight.
Approx. 115˚
Approx. 160˚
16