Specifications; Model Numbers; Engine; Fuel System - Exmark Metro Series Operator's Manual

Kawasaki ECS Handle Units
PART NO. 103-1623
LOCATION: Console

2. SPECIFICATIONS

2.1 MODEL NUMBER:
M3213KA; M3613KA; M4815KA; M3613KAC; M3615KCC; M4815KCC; M4815KAC

2.2 ENGINE

2.2.1 Engine Specifications: See your engine owner's manual.
2.2.2 RPM (No Load): 3600 rpm

2.3 FUEL SYSTEM

2.3.1 Capacity: 5 gal. (18.9 liter)
2.3.2 Type of Fuel: Use only clean, fresh, regular grade, unleaded gasoline with the
pump sticker octane rating of 87 or higher. In countries using the research method,
it should be 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut Off Valve: in-line, 1/4 turn

2.4 SAFETY INTERLOCK SYSTEM

Operator must have the transmission in neutral and PTO disengaged to start engine.
Release of Operator Presence Control (OPC) levers will cause engine to stop if
transmission is not in neutral and/or PTO is engaged.

2.5 STEERING/BRAKE CONTROL

Fingertip drive control levers provide independent control of traction, braking, and neutral
to each drive wheel for moving, stopping, and power turning. Parking brakes are engaged
by locking drive control levers in the "brake" position.
PART NO. 1-403143
LOCATION: Right Rear of Engine Deck
- 9 -