HP ProLiant DL320 Maintenance And Service Manual page 56

Table 3-1: Diagnostic Tools
Tool
ROM-Based Setup
Utility (RBSU)
Automatic Server
Recovery (ASR)
ROMPaq Utility
HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: MoonStar 266 Part Number: 293164-002 Last Saved On: 4/14/03 9:41 AM
continued
What it is
A utility used to configure the
hardware installed in or connected to
the server. Specifically, it can:
•
Resolve resource conflicts in
areas such as memory, port
addresses, and interrupts (IRQs).
•
Configure PCI boards
automatically.
•
Provide switch and jumper
settings.
•
Manage installation of memory,
processor upgrades, and mass
storage devices such as
hard drives, tape drives, and
diskette drives.
•
Store configuration information in
nonvolatile memory.
•
Assist in installation of an
operating system.
A tool that lets the server restart
automatically after a catastrophic
operating system failure.
•
Available Recovery−software
error recovery and environmental
recovery
•
Unattended Recovery−logs the
error information to the IML,
resets the server, and tries to
restart the operating system
A utility that upgrades the current
system ROM.
Diagnostic Tools
How to run it
Run RBSU directly by pressing the
F9 key during POST.
This tool is a function of the
combined hardware and software
system through the RBSU. Set the
ASR to enable.
Run this utility from the
ROMPaq diskette after powering up
the system unit.
3-3