HP ProLiant DL320 Quick Setup Poster

HP ProLiant DL320
Firewall/VPN/Cache Server
Quick setup poster
© Copyright 2004, 2005 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation.
Fourth Edition (June 2005)
Part Number 372218-004
372218- 004
Welcome to the HP ProLiant DL320
Firewall/VPN/Cache Server
The HP ProLiant DL320 Firewall/VPN/Cache server is factory
prepared to protect your networks and allow secure Internet
access. Use this quick setup poster to help set up the ProLiant
DL320 Firewall/VPN/Cache server.
HP highly recommends following the instructions in this quick
setup poster to the end. This poster quickly guides you from
opening the box to setting your initial custom firewall policy.
1

Checking the package contents

The package contains the following items in addition to the
items listed in the ProLiant DL320 G3 server documentation:
• Recovery CDs
• HP ProLiant DL320 Firewall/VPN/Cache Server User Guide
• HP ProLiant DL320 Firewall/VPN/Cache Server Network
Information Card
• This quick setup poster
2
Verifying your network
information
Use the HP ProLiant DL320 Firewall/VPN/Cache Server
Network Information Card to record the network details needed
during setup.
3
Connecting the ProLiant DL320
Firewall/VPN/Cache Server
Item Description
1 NIC port 1 (internal network)
2 NIC port 2 (external network)
3 NIC port 3 (perimeter network, optional)*
* NIC 3 will be installed in either PCI-X expansion slot 1 or 2,
depending on the type of NIC.
NOTE: The ProLiant DL320 Firewall/VPN/Cache server
is set by default to maximum security, actively
defending the network from the instant network
communications starts. For more information about this
feature, refer to the HP ProLiant DL320
Firewall/VPN/Cache Server User Guide.
1.
Plug one end of cable 1 into the internal port on the
ProLiant DL320 Firewall/VPN/Cache server, and plug the
other end into the internal network hub or switch.
2.
Plug one end of cable 2 into the external port on the
ProLiant DL320 Firewall/VPN/Cache server, and plug the
other end into the Internet-connected router or modem.
3. To use a perimeter network, plug one end of cable 3 into
the perimeter port on the ProLiant DL320 Firewall/VPN/
Cache server, and plug the other end into your perimeter
network hub or switch.
4. Connect a monitor to the VGA port on the ProLiant DL320
Firewall/VPN/Cache server.
5. Connect a keyboard and a mouse to the keyboard and
mouse ports.
6. Plug the computer end of the power cord into the ProLiant
DL320 Firewall/VPN/Cache server power inlet, and plug
the other end into an appropriate power source.
4

Powering on the server

Power on the ProLiant DL320 Firewall/VPN/Cache server. Refer
to the ProLiant DL320 G3 server documentation for additional
information.
5
Completing the ProLiant DL320
Firewall/VPN/Cache Server

Setup Wizard

After powering on the ProLiant DL320 Firewall/VPN/Cache
server, the Microsoft® Windows® Server 2003 dialog box
displays. It might take a few minutes for the ProLiant DL320
Firewall/VPN/Cache server to initialize.
1. At the Welcome to the Windows Setup Wizard page, click
Next.
2. At the Regional and Language Options page, follow the
instructions to set the regional and language options or to
use the default language, which is English (United States),
and then click Next.
Continued on reverse