GE J2B912 Owner's Manual & Installation Instructions page 17

To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the TIMER/CLOCK pad, then touch the
number pads until the time you want
appears in the display.
To Cancel the Timer
Touch the TIMER/CLOCK pad twice.
Power Outage
If a flashing time is in the display, you have
experienced a power failure. Reset the clock.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the TIMER/CLOCK pad and then
touching the number pads to enter the
new time you want.
Touch and hold the TIMER/CLOCK pad until
the display changes. Enter the correct time
of day by touching the appropriate number
pads. Touch the START pad.
ge.com
17