CS-A73KE
Servicing Information
–
Finally remove the fan motor by removing the
screw. (Fig. 5)
–
REMINDER - To reinstall the fan motor, adjust
the connector of the fan motor as Figure 5.
• Cross Flow Fan Removal Procedure.
1. Remove the control board and the fan motor by
referring to the "Indoor Fan Motor Removal
Procedure".
2. Remove the evaporator screw (Fig. 6)
3. Press the particular piece to loosen the evaporator.
(Fig. 7)
4. Remove the bearing. (Fig. 7)
5. Push up the evaporator and take out the cross flow
fan. (Fig. 7)
Bearing
cross flow fan
– 41 –
To install back the
Fan motor,
Please adjust the
connector location.
Screw
Fan motor
Fig. 5
Evaporator screw
Fig. 6
Evaporator
Push up
evaporator
Press the
particular
piece
Fig. 7