Table of Contents
Advertisement
Chapter 3
Driver Installation for Windows 95
Installing the PCMCIA 10Mbps Ethernet Card is just the same as any
normal Windows 95 Plug & Play device. Follow the steps below to
install.
1. Insert the PCMCIA 10Mbps Ethernet Card into an open PCMCIA slot on
your notebook.
2. After Windows 95 detects the card, the Update Device Driver Wizard
window, as shown in Figure 3.1, will appear. Insert the driver diskette and
click
to continue the installation.
Next
3. When Windows 95 finds the installation file in Driver Diskette and shows
the window in Figure 3.2 on your screen, click
Figure 3.1 Update Device Driver Wizard
.
Finish
5
Advertisement
Table of Contents
